![]() ![]() It’s best to avoid mounting the camera facing east or west as the rising and setting of the sun could produce false triggers and overexposed images.Ĭamera OPERATION (continued) area, press the MENU button, then step away from the camera. Mount the Camera It is recommended that you mount the camera about 4 or 5 feet (1.2~1.5 meters) off the ground, with the camera pointed at a slight downward angle. “N” (NO) is the default, so pressing OK will cancel the formatting, then pressing and holding MENU will exit menu mode.ĬAMERA OPERATION Once your camera has been setup, you are ready to begin using it to capture photos of wildlife activity in the area you choose to locate it. Press OK and the display will change to “Y N” with the SD card icon blinking. To format the card, press either UP/DOWN button and the “Fo” portion will blink. Press OK when “No” is flashing if you don’t want to format the card. The display will read “FoNo”, with “No” and the SD card icon blinking. However, you may need to reset the Date & Time after replacing the batteries, if they have been removed for a longer period of time. Note: The Date & Time setting will normally be retained for a few minutes when the batteries are removed from the camera. The time display uses the 24 hr standard, so 2:00 PM is indicated as “1400”, etc. To set the time, use UP/DOWN to set the hour and minute.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |